URL : https://www.valka.cz/7-62-mm-es-AMD-65-t82600#456476
Version : 0
The AMD 65 is the Hungarian version of the AKM designed for armoured vehicle crews and paratroopers. The rifle was introduced to the arsenal in 1967. The barrel is equipped with a muzzle brake of Hungarian design. The folding stock is also of its own design. The weapon has no upper receiver, the underarm is made of perforated sheet metal and a second handle is screwed to the lower part of the weapon to facilitate the control of the weapon when firing a burst. Magazines for 20 and 30 rounds are introduced to the weapon, a 40 round magazine for RPK cannot be inserted into the weapon due to the front grip. The firing switch has the positions locked, burst firing (marked 00) and single shot (marked 1).
Source: author's archive
URL : https://www.valka.cz/7-62-mm-es-AMD-65-t82600#302656
Version : 0
Reklama
Collection
URL : https://www.valka.cz/7-62-mm-es-AMD-65-t82600#302772
Version : 0
Collection
URL : https://www.valka.cz/7-62-mm-es-AMD-65-t82600#302791
Version : 0
Collection
kladívko napnuto
v porovnání s Typ 65 (vzhledově AKMS 47)
URL : https://www.valka.cz/7-62-mm-es-AMD-65-t82600#302792
Version : 0
Reklama
AMD 65/5
vlastní foto
vlastní foto
URL : https://www.valka.cz/7-62-mm-es-AMD-65-t82600#313079
Version : 0
Several photos detail shot of the AMD-65. All custom photo.
Comparison with maďarkou rifle AK-63, of which AMD-65 builds:
Look at the case conclusion from the right, the fuse is in the position "secured". Note the marking of the positions of the modes of shooting the leader and ležatou osmičkou, which is Kalashnikovs, the Hungarian manufacturing typical:
Case the end from the left with a visible serial number. Mark the shape of the coat of arms is the designation of degraded weapons:
Trigger záchytem the stack. Note přievnění carriers contained using four rivets:
The rear part of the receiver with the visible serial number and the fitting of the shoulder rests (in napřímeném and the folded state). Milled kostička is the back of the bezel předsuvné springs; her zamáčknutím and the subsequent lifting the lid of the receiver is done rozborka weapons. The weld is again part of the depreciation) of:
Gas násadec, metal předpažbí and the front handle:
At the front of the handle Hungarian engineers have followed the easiest possible way - without any changes to take pažbičku (including the recess for the lučík), only to about 180° turned:
Adjustable visor, cejchované to 800 metres (compare with AK-63, which has the visor cejchované to 1000m):
The carrier of the front sight and silencer výšlehu flame:
Forehead shock výšlehu:
Vytěrák, stored under the main. Exempts such a way that its front part to fold back down until the head slips out of the groove, and then pulls ahead:
The rear handle of the carrier belt and the fixing pažbičky screw:
Screw to the right of the fixed position of the shoulder rests. After his stusknutí it is possible to the shoulder the head restraint to fold or straighten up: .
URL : https://www.valka.cz/7-62-mm-es-AMD-65-t82600#315135
Version : 0
Join us
We believe that there are people with different interests and experiences who could contribute their knowledge and ideas. If you love military history and have experience in historical research, writing articles, editing text, moderating, creating images, graphics or videos, or simply have a desire to contribute to our unique system, you can join us and help us create content that will be interesting and beneficial to other readers.
