URL : https://www.valka.cz/CZK-EC-1-kVA-elektrocentrala-1-kVA-t70700#617030
Version : 0
The portable power plant EC-1kVA is the smallest power plant of 1 kVA. It is designed for the production of single-phase alternating current with a voltage of 220 V. Its main use is for lighting. Powers the OS-1 kVA lighting kit.
Main data:
Dimensions in mm: Length: 820 Width: 485 Height: 640 Weight: 140 kg (with crate)
Engine: ZB 5a petrol two-stroke - lowering foot Cylinder capacity: 183.3 cm³ Power: 3 pcs at 3000 rpm. Engine weight: 47 kg Fuel consumption BA-90: 1.5 l/MH Fuel tank capacity: 7 l Operating time: 5 hours Alternator: 220 V/4.55 A Switchboard: ZR-504 Operator: 1 engineer
Source: Guide for Engineers Our Army 1964
Period
-
Type
-
Camouflage
-
Country
-
Production No.
-
Poznávací značka / evidenční číslo
-
Tactical marking
-
Name
-
Unit
-
Date (DD.MM.RRRR)
DD.MM.RRRR
Author
-
Print size / 300 DPI
-
Published with authors permit
-
Author Website
-
Prenosná elektrocentrála EC-1kVA
URL : https://www.valka.cz/CZK-EC-1-kVA-elektrocentrala-1-kVA-t70700#249125
Version : 0
Reklama
Generator type: ZG-60 Engine power 2,21 kW Number of sockets - 1
URL : https://www.valka.cz/CZK-EC-1-kVA-elektrocentrala-1-kVA-t70700#414006
Version : 0
Diskuse
Mr. Hlavatý, please correct in TTÚ - EC weight from 140 kg to 100 kg, as evidenced by the label. Although I am a little confused by the information on the label on the cut where the weight is only 89 kg, it will probably be due to the older version of the engine and switchboard.
URL : https://www.valka.cz/CZK-EC-1-kVA-elektrocentrala-1-kVA-t70700#414024
Version : 0
Mr. colleague, 140 kg is the weight with the crate. I have it documented.
URL : https://www.valka.cz/CZK-EC-1-kVA-elektrocentrala-1-kVA-t70700#414032
Version : 0
Reklama
Good day, Mr. Hlavatý, I would like to ask you (or anyone) if you do not have an EC ZB5 engine repair manual. I have this engine on my home tractor and it started to make me angry. I would also like to find out what operating fluids are put into the engine. I read the petrol thanks to your description in the forum. StenliH@seznam.cz Thank you
URL : https://www.valka.cz/CZK-EC-1-kVA-elektrocentrala-1-kVA-t70700#533780
Version : 0
Honor job, I have a small question ... lay. I also own this headquarters, but very briefly and now I perform basic maintenance work. Plus, she didn't have a tank, so I got another one from an old lawn mower, and after a complete renovation, I'll probably put it there today.
But what do I want to ask. So I have a complete set of maintenance except for one thing - it is written in the lubrication plan that the alternator bearings are lubricated after 100 operating hours. I'd like to do it, but I don't know how to get to them simply, or what I should do to get to them and not disassemble the headquarters regiment unnecessarily. Does anyone have experience with this, please, and will you advise the amateur? Many thanks for the advice.
URL : https://www.valka.cz/CZK-EC-1-kVA-elektrocentrala-1-kVA-t70700#579301
Version : 0
Citace - [url =/author/view/35223]Viki[/url] :
Hello, I would also like to find out what operating fluids are added to the engine. I read the petrol thanks to your description in the forum. StenliH@seznam.cz
URL : https://www.valka.cz/CZK-EC-1-kVA-elektrocentrala-1-kVA-t70700#579675
Version : 0
Hello, I would like to ask, where can I find a throttle at headquarters? I didn't make much of a picture of the description. Thanks in advance for your answer
URL : https://www.valka.cz/CZK-EC-1-kVA-elektrocentrala-1-kVA-t70700#579840
Version : 0
I have a complete set of maintenance, except for one thing - the lubrication plan says that the alternator bearings are lubricated after 100 operating hours. I'd like to do it, but I don't know how to get to them simply, or what I should do to get to them and not disassemble the headquarters regiment unnecessarily. Does anyone have experience with this, please, and will you advise the amateur? Many thanks for the advice.[/Quote]
The repairman told me that the bearings could not be lubricated other than by disassembly.
PS: But in the lubrication schedule table, the bearings are lubricated after 1000 h, not after 100. Then there is something wrong.
URL : https://www.valka.cz/CZK-EC-1-kVA-elektrocentrala-1-kVA-t70700#579841
Version : 0
Citace - [url =/author/view/35709]Safaja[/url] :
Hello, I would like to ask where can I find a throttle at headquarters? I didn't decipher much from the picture with the description. Thanks in advance for the reply
The throttle is located in the carburetor. Its movement is controlled by an automatic controller.
URL : https://www.valka.cz/CZK-EC-1-kVA-elektrocentrala-1-kVA-t70700#579880
Version : 0
Good day, I would like to ask if anyone has experience with changing the seals at this headquarters. The control panel runs smoothly and oil flows slowly from it in the area where the shaft comes out of the gearbox behind the fan/flywheel. There are two big segeresses, I put the yen down, but pliers weren't enough for the bigger one. Should I try to get to that gasket from this side or should I open the transmission straight away? I can possibly provide a photo. Thank you in advance for your reply.
URL : https://www.valka.cz/CZK-EC-1-kVA-elektrocentrala-1-kVA-t70700#580685
Version : 0
Hello
I want to ask everyone, I bought it from Mr. EC, who was supposed to be in operation a few years ago and unintentionally repaired. We cleaned the carburetor, flushed the crankcase with technical gasoline, blew the nozzles through the air (I admit they weren't taken out), and the EC only ran with a choke. In the end, we determined that it would be necessary to clean it more or less, but it went without burdening the saturation nicely. Then the next day I wanted to kick my wife to make myself happy that someone else would see it and after about 15 seconds the EC stopped going as if someone had turned it off. Since then, it has not cut zero at all, completely dead or nothing on the starting spray. Before that, he always had the first step. Candle poppy, I can't measure the advance/I can't measure it, but it seems to me that it sparks about 5 mm before the top door. I measured that the compression on the piston is 90PSI/6.2bar. Does anyone know what could cause this?
Thanks a lot for the advice, Vitek
URL : https://www.valka.cz/CZK-EC-1-kVA-elektrocentrala-1-kVA-t70700#619978
Version : 0
.Adjust the order of the engine in relation to several red marks on the selected magnet and the engine. piston.Port.
URL : https://www.valka.cz/CZK-EC-1-kVA-elektrocentrala-1-kVA-t70700#640216
Version : 0
Colleague Dušane, operating instructions can be bought - see www.autoantikvariat.cz Spare parts catalog can be purchased - see motomanual.cz
URL : https://www.valka.cz/CZK-EC-1-kVA-elektrocentrala-1-kVA-t70700#640253
Version : 0
Hello, I would also like to know how to lubricate the bearing because I also have such an EC thank you
URL : https://www.valka.cz/CZK-EC-1-kVA-elektrocentrala-1-kVA-t70700#691761
Version : 0
Hello, please, did you solve the gufero somehow? I have the same problem. Thank you for the answer.
URL : https://www.valka.cz/CZK-EC-1-kVA-elektrocentrala-1-kVA-t70700#742392
Version : 0
Join us
We believe that there are people with different interests and experiences who could contribute their knowledge and ideas. If you love military history and have experience in historical research, writing articles, editing text, moderating, creating images, graphics or videos, or simply have a desire to contribute to our unique system, you can join us and help us create content that will be interesting and beneficial to other readers.