The SB-6 group ramming set was used for ramming of pile supports with 4 - 6 piles of 18 - 24 cm diameter and for setting of frame supports of low-water bridges / NVM / of 40 - 60 t load capacity. 1/3 of the supports could be rammed from a PV3S car on dry land or in water up to a water depth of 80 cm, when the bottom was relatively flat and sufficiently load-bearing. On the water, the ram was made from a rig of at least one three-piece SMS / Smedium M bridge S rig / , namely 2/3 of an SB-6 / four-pile barge / , or 3/3 of an SB-6 / six-pile barge /.
The SB-6 was introduced into the CSL in 1959.
Main Data:
The SB-6 kit consists of :
- LSB group ramming scaffolding,
- 6 NB-180 diesel rammers,
- one three-piece SMS pontoon with accessories,
- 4 P V3S off-road trucks - three of which are each one-third loaded with a ramming kit and one truck is loaded with a three-piece SMS pontoon.
Weight of one third of the kit : 1500 kg
Weight of the whole kit with accessories : 5000 kg
The SB-6 kit is divided into 3 parts / thirds /, each of which forms a separate ram scaffold with two ram scaffolds.
Time to build the baranidl scaffold by HSC-4 / crane / about 10 - 15 minutes
Time to build the baranidl scaffold by hand about 20 - 30 minutes
Work cycle time :
Setting up a 4 - 6 pile barge 10 - 15 minutes
Setting up a frame support about 10 minutes
Servicing one baraniddle 2 men
Sailing crew 4 men
Servicing a baraniddle barge :
During the construction of 4 pile barge 1 + 2 + 12
During the construction of 6 pile barge 1 + 2 + 16
During the ramming of vehicle 1 + 6
The barging crew / 4 men / carried out the pushing off of the baraniddle bilge and securing it in the centreline of the next barge, so that the baraniddle crew was at that time preparing the next barge for ramming.
Source : Handbook for engineers Naše vojsko 1964
Military bridges and water supply
SVŠT 1984
Source : Bílek, Jiří, a.i. : Czechoslovak People's Army in the Warsaw Pact coalition ties. MINISTRY OF DEFENCE OF THE CZECH REPUBLIC 2008
Zarážanie pilót Zdroj : Vojenská technika 1963 č.4
Súprava na baranenie SB-6 - archív autora - Čs.voják
Baranidlá zo súpravy SB-6
SB-6 Súprava pre skupinové baranenie
The SB-6 was introduced into the CSL in 1959.
Main Data:
The SB-6 kit consists of :
- LSB group ramming scaffolding,
- 6 NB-180 diesel rammers,
- one three-piece SMS pontoon with accessories,
- 4 P V3S off-road trucks - three of which are each one-third loaded with a ramming kit and one truck is loaded with a three-piece SMS pontoon.
Weight of one third of the kit : 1500 kg
Weight of the whole kit with accessories : 5000 kg
The SB-6 kit is divided into 3 parts / thirds /, each of which forms a separate ram scaffold with two ram scaffolds.
Time to build the baranidl scaffold by HSC-4 / crane / about 10 - 15 minutes
Time to build the baranidl scaffold by hand about 20 - 30 minutes
Work cycle time :
Setting up a 4 - 6 pile barge 10 - 15 minutes
Setting up a frame support about 10 minutes
Servicing one baraniddle 2 men
Sailing crew 4 men
Servicing a baraniddle barge :
During the construction of 4 pile barge 1 + 2 + 12
During the construction of 6 pile barge 1 + 2 + 16
During the ramming of vehicle 1 + 6
The barging crew / 4 men / carried out the pushing off of the baraniddle bilge and securing it in the centreline of the next barge, so that the baraniddle crew was at that time preparing the next barge for ramming.
Source : Handbook for engineers Naše vojsko 1964
Military bridges and water supply
SVŠT 1984
Source : Bílek, Jiří, a.i. : Czechoslovak People's Army in the Warsaw Pact coalition ties. MINISTRY OF DEFENCE OF THE CZECH REPUBLIC 2008
Period | - |
Type | - |
Camouflage | - |
Country | - |
Production No. | - |
Poznávací značka / evidenční číslo | - |
Tactical marking | - |
Name | - |
Unit | - |
Date (DD.MM.RRRR) | - |
Author | - |
Print size / 300 DPI | - |
Published with authors permit | - |
Author Website | - |
Zarážanie pilót Zdroj : Vojenská technika 1963 č.4
Period | - |
Type | - |
Camouflage | - |
Country | - |
Production No. | - |
Poznávací značka / evidenční číslo | - |
Tactical marking | - |
Name | - |
Unit | - |
Date (DD.MM.RRRR) | - |
Author | - |
Print size / 300 DPI | - |
Published with authors permit | - |
Author Website | - |
Súprava na baranenie SB-6 - archív autora - Čs.voják
Period | - |
Type | - |
Camouflage | - |
Country | - |
Production No. | - |
Poznávací značka / evidenční číslo | - |
Tactical marking | - |
Name | - |
Unit | - |
Date (DD.MM.RRRR) | - |
Author | - |
Print size / 300 DPI | - |
Published with authors permit | - |
Author Website | - |
Baranidlá zo súpravy SB-6
Period | - |
Type | - |
Camouflage | - |
Country | - |
Production No. | - |
Poznávací značka / evidenční číslo | - |
Tactical marking | - |
Name | - |
Unit | - |
Date (DD.MM.RRRR) | - |
Author | - |
Print size / 300 DPI | - |
Published with authors permit | - |
Author Website | - |
SB-6 Súprava pre skupinové baranenie