BEL - FN SCAR-H (Mk 17 Mod 0)

FN SCAR
(c) REMOV


It is a shooting range system consisting of an automatic carabiner (7.62 mm x 51 NATO) SCAR-H/Mk 17 Mod 0 and an automatic carabiner (5.56 mm x 45 NATO) SCAR-L/Mk 16 Mod 0.


Each of them possesses three replaceable loofahs, thanks to which it is possible to create a single chamber of the locked version of the locomotive with a walk in the vicinity of the nearby distances (CQC), standard remuneration (STD) and selection (SV). In the case of SCAR-L, the length is higher, corresponding to 235, 351 and 457 mm, for SCAR-H 235, 400 and 508 mm. Replacing the louvre is a matter of a few minutes and the removal of the arm layout and the removal of a set of powerful screws (after three from each of the pages).


The SCAR-H subcarbine (CQC), the SCAR-H carabiner (STD) and the SCAR-L carabiner (STD) with a 40-mm grenade launcher suspended by the EGLM were shown at Eurosatory 2006. The final version in a small stage varies from the development of the development, it was changed cosmetically and in the main only one, some functionality (ergonomics) of the arm was corrected. In general, the replacement of loops (including additional screws for loosening the loofah) has been changed, a number of police cushions have been mentioned, and a new AAC transmission pressure has been introduced with the possibility of rapid sea pressure. The SCAR, similar to the M16/M4 family, has a two-part, upper, aluminum and lower locking chamber made of plastic nuts, which has a trigger-locking mechanism.


SCAR from the interested party developed into one of the most interesting shooting systems on the market. In general, both L and weight H are equal to 60%, with the exchange of elements between the CQC, STD, SV versions being 90%. A further development of this construction is the possibility of applying the ammunition by means of a joint in the common part of the upper parts of the upper part of the lock chamber (Common Upper Receiver) of the corresponding loops, locks and lower parts of the chambers. The whole section, together with the unit, consists of itself. The arm, based on NATO standard gauges (5.56 mm and 7.62 mm), was also sent with an ammunition of 7.62 mm x 39, which prompted the command of the commander to operate smoothly and to survive the ammunition of their engineers while maintaining the performance of the proposed function. and also all additional equipment.


It is the first automatic carabiner, which in standard has a regulated pillow case. As it is, it is not necessary to overcome any high mounting of some optoelectronic devices. Moreover, stacked on the side of a regulated length will also meet all expectations and can be carried out in such positions in such locations.


In SCAR, many of the M16/M4 functionality has been maintained, with an additional number of additional elements that can be repaired in the same way - the properties of the magazine and the rear switchboard are only fully equipped with a semi-detached half-timbered side. and its rotation is significantly lower than in 16/M4 (45 ° area 90 °), which will significantly improve the connection speed. The tensioning handle is also adjustable.


June 6, 2006 US SOCOM has signed a contract for the small-scale production of both SCAR models, with the date of delivery of the new gate for the 2007 tests. SCAR has up to five other designs: M4A1 carabiners, CQBR subcarabiners, M66 carriage and 12 carabiners. mm NATO) and carbines Mk 11 and M14 (up to 7.62 mm NATO ammunition). In the future, the elite armor of special departments may become a basic model in all US Armed Forces. It can be added to this price, not more than M4 (about 750 USD).