CZK - UDS-110a (univerzální dokončovací stroj)

Hydraulic shovel excavator UDS 110a is a machine on the machine chassis of the car TATRA 148. The excavator is equipped with a shovel with teeth and a removable scarifying blade at the bottom of the shovel.


The machine chassis with reinforced feathering of the front wheels allows great mobility of the excavator on roads and drivable dirt tracks. In wet or uneven terrain, the movement of the excavator is considerably hampered.


Description of the excavator


- T 148 machine chassis with auxiliary drive,
- lower frame,
- upper frame,
- hydraulic support device,
- diesel engine Zetor 8601 - 6 V - water-cooled,
- hydraulic pump drive,
- working equipment,
- hydraulic equipment,
- driver's cab,
- excavator control,
- 24 V electrical equipment,
- filtering and ventilation equipment FVZ 15/24,
- accessories.



Production: 1976 - 1982, ZŤS Tisovec



Source : Žen-22-2 Hydraulic shovel excavator UDS 110a - ČSĽA regulation, Prague, 1980
CZK - UDS-110a (univerzální dokončovací stroj) - Popis UDS 110a.

Popis UDS 110a.
CZK - UDS-110a (univerzální dokončovací stroj) - UDS 110a.

UDS 110a.
CZK - UDS-110a (univerzální dokončovací stroj) - Kabína strojníka - popis.

Kabína strojníka - popis.
CZK - UDS-110a (univerzální dokončovací stroj) - Spodný rám nadstavby.

Spodný rám nadstavby.
URL : https://www.valka.cz/CZK-UDS-110a-univerzalni-dokoncovaci-stroj-t40467#373053 Version : 0
Hydraulic shovel excavator UDS 110a is mounted on the machine base of T-148 car. The hydraulic device allows easy and precise control of the shovel and boom. The shovel is equipped with teeth and a removable scarifying blade at the bottom of the shovel. The excavator can be used when working in rocks of 2nd, 3rd, 4th class. When working in Class 5 soils, the rock must first be cut with a knife fixed to the bottom of the shovel.


At temperatures of - 15 degrees C to + 37 degrees C it is capable of carrying out the following work :


- excavate a trench 1,1 m wide and 6,1 m deep,


- excavate pits up to a depth of 6.1 m,


- adjusting the banks at the ford entrance,


- moving trees / other loads / up to 1200 kg with the boom fully retracted.


The hydraulic supports must be extended before work. The excavator can work with a height or depth shovel.



Main technical data :


- theoretical volume of the shovel - 0,5 m3,
- theoretical working cycle time - 22 s
- permissible working inclination : 5 degrees in the transverse direction - 10 degrees in the longitudinal direction.


Operating weight : 20200 kg


Operator : 1 senior machinist + 1 machinist


Reach with depth shovel in metres :


Boom fully retracted/extended


- max. horizontal reach 5.92 / 10.1
- max. depth reach 1.4 / 4.9
- max. ejection height 4.0 / 6.1
- max. height reach 5.6 / 7.7


Maximum road transport speed : 50 km/h


Machine base motor: T2-928-1


Fuel consumption : 65 l / 100 km


Excavator engine :Zetor 8601 - 6 cylinder diesel,


Power : 82,4 kW at 2200 rpm. / min.


Fuel consumption : 24 l / MH


The Shovel is welded from steel plates. The sides of the shovel are arched on the top for easier gripping of bar loads between the shovel and the boom. The cutting edge is fitted with 4 replaceable teeth. The bottom of the shovel has 2 blades on the outside, between which there is a scarifying blade with an interchangeable tip on pins. The shovel can be used as a depth shovel or, when reversed, as a height shovel.


The Machinist's cab allows the machinist to operate the machine, has a good view of the work site and provides protection from the weather. It is located on the upper frame on flexible pads. It has a prismatic shape. The front and side walls are glazed, the rear wall is glazed only at the top. There is a warning beacon on the roof of the cab.



Source : Technical training of engineer units SVŠT Bratislava 1988
URL : https://www.valka.cz/CZK-UDS-110a-univerzalni-dokoncovaci-stroj-t40467#249411 Version : 0
The predecessor of the UDS 080 during military trials.
CZK - UDS-110a (univerzální dokončovací stroj) - (Bojová příprava)

(Bojová příprava)
URL : https://www.valka.cz/CZK-UDS-110a-univerzalni-dokoncovaci-stroj-t40467#249426 Version : 0
Universal finishing machine UDS 110a from CSLA armament.



Source : Žel-58-1 TTD of the railway troops' techniques - ČSLA Prague 1973
CZK - UDS-110a (univerzální dokončovací stroj) - UDS-110a v ČSĽA.

UDS-110a v ČSĽA.
CZK - UDS-110a (univerzální dokončovací stroj) - UDS-110A © Československý voják 1983 č.16

UDS-110A © Československý voják 1983 č.16
URL : https://www.valka.cz/CZK-UDS-110a-univerzalni-dokoncovaci-stroj-t40467#305432 Version : 0

This post has not been translated to English yet. Please use the TRANSLATE button above to see machine translation of this post.

UDS-110a (VPZ 315 50-86, rok výroby 1981) z výzbroje 152. záchranného praporu, květen 2008.
CZK - UDS-110a (univerzální dokončovací stroj) -


CZK - UDS-110a (univerzální dokončovací stroj) -


URL : https://www.valka.cz/CZK-UDS-110a-univerzalni-dokoncovaci-stroj-t40467#305492 Version : 0
Discussion post Fact post
Attachments


Join us

We believe that there are people with different interests and experiences who could contribute their knowledge and ideas. If you love military history and have experience in historical research, writing articles, editing text, moderating, creating images, graphics or videos, or simply have a desire to contribute to our unique system, you can join us and help us create content that will be interesting and beneficial to other readers.

Find out more