The SHM 4 - 120 is a self-propelled tandem grader designed for earthmoving work such as precise plan levelling, grading and spreading of material during sloping, excavation, repair and maintenance of ditches, roadside maintenance and vegetation removal. It can be used for scarifying soil, pavement ripping and snow removal.
However, its main use is in the construction, rehabilitation and maintenance of roads, motorways, railways, airports and landscaping.
The above work is carried out with a supervisor and grader plough and scarifier, which are hydraulically operated.
Manufacturer.
General description:
The basic supporting structure is a tubular welded frame, which serves simultaneously as fuel tank, hydraulic oil tank and air receiver.
The following is mounted on the frame:
- a monitoring bucket,
- swing front axle,
- swing bridge with fifth wheel and grader,
- hydraulic cylinders for vertical and horizontal movement of the coulter,
- tandem rear axle,
- scarifier,
- engine and driver's cab.
Main technical data :
Engine 4 VD 14,5/12-1 SRW 4 V four-stroke - liquid-cooled - OHV distribution.
6590 cm³
Power: 88 kW at 2200 rpm.
88 kW (88 kW) Volume:
- 200 l fuel tank,
- hydraulic oil tank: 93 l
Max. 45 km/h.
Tyres: 14.00 - 24.00
Dimensions in mm:
Length: 9250 - with dozer blade and scarifier
Width: 2420 - with grader in transport position
Height: 3430 - with warning beacon / 3194 - without beacon
Ground clearance: 240 (lowest edge of the coulter)
Weight in kg:
Standing: 11770
Total: 11850
Grader coulter:
Width: 3640 mm
Height: 635 mm
Cutting bar height: 140 mm
Reach below wheel level: 800 mm
Rotation about own axis: 360°
Sideways swing: 90°
Dosing coulter:
Width: 2414 mm
Height: 870 m
Cutting bar height: 140 mm
Reach below wheel level: 70 mm
Clearance: 480 mm
Scarifier:
Number of blades: 1 to 11
Cutting width: 1550 mm
Cutting depth: 250 mm
Clear height: 400 mm
Operator: machine operator
Transport :
- on its own axis on public roads, it is only economical up to 150 km,
- by rail on Nsk, Vd, Vtd, and NaS series wagons.
Source.
However, its main use is in the construction, rehabilitation and maintenance of roads, motorways, railways, airports and landscaping.
The above work is carried out with a supervisor and grader plough and scarifier, which are hydraulically operated.
Manufacturer.
General description:
The basic supporting structure is a tubular welded frame, which serves simultaneously as fuel tank, hydraulic oil tank and air receiver.
The following is mounted on the frame:
- a monitoring bucket,
- swing front axle,
- swing bridge with fifth wheel and grader,
- hydraulic cylinders for vertical and horizontal movement of the coulter,
- tandem rear axle,
- scarifier,
- engine and driver's cab.
Main technical data :
Engine 4 VD 14,5/12-1 SRW 4 V four-stroke - liquid-cooled - OHV distribution.
6590 cm³
Power: 88 kW at 2200 rpm.
88 kW (88 kW) Volume:
- 200 l fuel tank,
- hydraulic oil tank: 93 l
Max. 45 km/h.
Tyres: 14.00 - 24.00
Dimensions in mm:
Length: 9250 - with dozer blade and scarifier
Width: 2420 - with grader in transport position
Height: 3430 - with warning beacon / 3194 - without beacon
Ground clearance: 240 (lowest edge of the coulter)
Weight in kg:
Standing: 11770
Total: 11850
Grader coulter:
Width: 3640 mm
Height: 635 mm
Cutting bar height: 140 mm
Reach below wheel level: 800 mm
Rotation about own axis: 360°
Sideways swing: 90°
Dosing coulter:
Width: 2414 mm
Height: 870 m
Cutting bar height: 140 mm
Reach below wheel level: 70 mm
Clearance: 480 mm
Scarifier:
Number of blades: 1 to 11
Cutting width: 1550 mm
Cutting depth: 250 mm
Clear height: 400 mm
Operator: machine operator
Transport :
- on its own axis on public roads, it is only economical up to 150 km,
- by rail on Nsk, Vd, Vtd, and NaS series wagons.
Source.