Mauser K98

     
Název:
Name:
Mauser K98 Mauser K98
Originální název:
Original Name:
Mauser K98
Kategorie:
Category:
opakovací puška repeating rifle
Výrobce:
Producer:
DD.02.1902-DD.MM.1905 Waffenfabrik Mauser AG, Oberndorf am Neckar
Technické údaje:
Technical Data:
 
Hmotnost nenabité zbraně:
Weight Unloaded:
3.42 kg 7.54 lb
Ráže:
Calibre:
7,92 mm
Náboj:
Cartridge:
8 x 57 IS, 8 x 57 I do roku 1903 / until 1903
Délka:
Length:
945 mm 3 ft 1 ¼ in
Délka hlavně:
Barrel Length:
430 mm 1 ft 4 ⅞ in
Kapacita zásobníku:
Magazine Capacity:
5
Výkony:
Performance:
 
Rychlost střelby:
Rate of Fire:
- ran/min - rpm
Úsťová rychlost:
Muzzle Velocity:
- m/s - ft/s
Uživatelské státy:
User States:
- -
Poznámka:
Note:
také označována jako Karabiner 98 (K98) also known as Karabiner 98 (K98)
Zdroje:
Sources:
https://en.wikipedia.org/wiki/Gewehr_98
URL : https://www.valka.cz/Mauser-K98-t29317#614696 Version : 0
History
In 1902 was established a shortened compact version of the rifle G98, called "Karabiner 98". Compared to the basic variant G98 is about 305 mm shorter (the barrel is shorter by 310 mm), the stock reaching to the muzzle, where it is topped off with massive fittings (serving at the same time as the sheath flies) and the carrier belt is mounted on the left side of the gun. A significant change has undergone also handle the conclusion, which is at K98 bent down and furthermore flattened to her went on a scabbard bodáku. Due to the shorter barrel, it was necessary to adjust the visor, which is nynístavitelné in the range of 200 to 1800 meters.
Practice showed, however, that the barrel is too short to be at least sufficiently tapped potential, which provided a new hub to zahrocenou shot (8x57JS) - due to the short barrel wasn't all the volume of the gunpowder to burn before the bullet left the barrel, which, in addition to strong light and sound effect, it also adversely affect the shooting accuracy. For these reasons, the carbine K98 spread just a little and today is their occurrence very rare.

Design
Carbine K98 Mauser is a refresher gun with swivel odsuvým conclusion. Bullets are stored in double-row, fixed the mailbox, located in front of the trigger guard and the trigger. The box is filled from the top by charging the tape.

The main parts of the rifle are: the Barrel with sights, case conclusion, conclusion, gas -, and stock.

The barrel length of 430 mm is provided with four right-handed grooves with a constant pitch of 240 mm. On the barrel is also soldered the base of the visor.

The barrel is in the back screwed into the breech that connects all the essential parts of weapons in a single unit. In case the conclusion is also moving conclusion. The rear part of the breech is the so-called bridge, in which the front side are vyfrézovány cutouts for the deployment of charging the tape. On the left side of the bridge with a screw fastened spring-loaded bracket the conclusion, which forms the rear stop conclusion.

The conclusion consists of závěrnice, extractors, ring extractors, a firing pin, the percussion spring, striker nuts, caps, stud caps with a spring and a fuse.
In závěrnici are three locking barbs (two front and one rear) and right of her outgoings equal to the crank end. At the head of závěrnice is the hole for the firing pin ůderníku. On the right side of the závěrnice is the rotary extractor.
The firing pin is threaded through the drum spring and at its rear end is a bayonet joint deployed úderníková matrix, which has in spodí part of the bar with the bevel, which corresponds to the screw surface in the viewport závěrnice. When turning závěrnice left is úderníková matrix odtlačována backward and thus is stretched by a drum spring. At the bottom of the strips, striker nuts are two barbs, used to capture the cog of the sear.
The individual parts of the conclusion connects the enclosure. In it is stored a fuse and a pin that ensures the correct position of the caps against the závěrnici and also prevents the rotation of an unlocked breech. Křidélková fuse has three positions - left disarmed, up to ensure, and when the position of the wings fuse to the right is ensured and in addition blocked the movement of conclusion.
Trigger system, placed in a pouch the conclusion consists of the trigger with the pin, the trigger spring and the sear with the pin. The spring pushes the spoušťovou the lever up, where your cog captures úderníkovou nut. Pressing the shutter button will lower the rear of the sear, claw comes out of the shot and úderníková matrix is released. After the release of pressure on the trigger to spoušťová lever returns to its original position.

A gas-whose body forms a single unit with the trigger guard of the trigger, is the two screws from the bottom screwed to the case conclusion. The bottom of the mailbox is to the body attached with spring-loaded pin. In the bottom of the clipboard is inserted folded flat spring, which pushes up the feeder rounds. The bullets are in a box stored in a block pattern in two rows.

Butt and nadpažbí are made from a full walnut or beech wood; exceptional grip made from a different kind of full wood. Case the conclusion is the stock řipevněno using two continuous screws, which also connect the housing with the cartridge box. The barrel is the barrel attached with two hlavňových sleeves, while from the front forward stands out capture bodáku. The recoil of the shot is on the butt přenáčen using čtyřhraného čepového beds, located below the cartridge chamber.
In hlavišti the butt is a hole for the guard to accept the passage of the carrier belt and behind him is a bed for disassembly of the conclusion. The rear part of the butt is against damage to the protected by a steel boot.

Technical details
Caliber - 7.9 mm
Hub - 7.9 mm mod. 98 (today's designation 8x57JS)
Length - 945 mm (L. Olson reported 950 mm)
Length with bayonet - 1195 mm
Empty weight - 3,4 kg (L. Olson reported 3.5 kg)
Barrel length - 430 mm (L. Olson reported 440 mm)
The number of grooves in the barrel - 4
Pitch bore - 240 mm
The sense of pitch - right
The depth of the grooves - 0.12 mm
The width of the grooves - 4,40 mm
The capacity of the cartridge box - 5 rounds
The range of looks - from 200 to 1800 m

Markings
On the left side of the receiver was engraved with the designation "Kar. 98“, on the upper surface of the socket of the receiver was the imperial crown, below it the name of the manufacturer and under him a full year of production..
URL : https://www.valka.cz/Mauser-K98-t29317#103963 Version : 0

This post has not been translated to English yet. Please use the TRANSLATE button above to see machine translation of this post.

Schéma







Zdroj: www.firearmdiagrams.com
URL : https://www.valka.cz/Mauser-K98-t29317#376941 Version : 0

This post has not been translated to English yet. Please use the TRANSLATE button above to see machine translation of this post.

V nadcházející německé aukci se bude dražit Karabina 98 vyrobená v Erfurtu roku 1903 pro obsluhy kulometů, v ráži 8 x 57mm IS. Je extrémně vzácná, dochovalo se jich jen několik kusů v tomto stavu. Tomu odpovídá vyvolávací cena EUR 15 000,-.



Prameny: www.thies-schmid-waffenauktionen.de
URL : https://www.valka.cz/Mauser-K98-t29317#741225 Version : 0

This post has not been translated to English yet. Please use the TRANSLATE button above to see machine translation of this post.

.
URL : https://www.valka.cz/Mauser-K98-t29317#741226 Version : 0

Diskuse

This post has not been translated to English yet. Please use the TRANSLATE button above to see machine translation of this post.

Dobrý den,


potřeboval bych poradit ,čím se upevňuje nosič bajonetu na pažbu K98, nikde jsem to nenašel vyfocené tak nevím. Děkuji
URL : https://www.valka.cz/Mauser-K98-t29317#434392 Version : 0

This post has not been translated to English yet. Please use the TRANSLATE button above to see machine translation of this post.

Nosič bodáku je připevněn pomocí přední hlavňové objímky. Samotná objímka je pak pojištěna perem.
URL : https://www.valka.cz/Mauser-K98-t29317#434406 Version : 0
Discussion post Fact post
Attachments

Join us

We believe that there are people with different interests and experiences who could contribute their knowledge and ideas. If you love military history and have experience in historical research, writing articles, editing text, moderating, creating images, graphics or videos, or simply have a desire to contribute to our unique system, you can join us and help us create content that will be interesting and beneficial to other readers.

Find out more